Herbicide Emulsifier

Approx. Rs 850 / KgGet Latest Price

Brand Name : SUDASOL BT-50

EMULSIFIER FOR PRETICHLOR/BUTACHLOR EW

SUDASOL BT 50 is a state of art product designed to formulate Pretilachlor/Butachlor EW (Emulsion in Water) formulations. The product has been designed for the formulators of Pretilachlor/Butachlor EW keeping in mind the cost efficacy and ease of use. The product inculcates following features:-

1. Single component system

2. No additional thickening agent (Gum) is required to improve the viscosity

3. Emulsion made is smooth and homogenous

4. Cost-effective because of extremely low dose (0.8-1%)

5. Easy to use.

PROCEDURE

1. Add Butachlor/pretilachlor technical and required quantity of DMW (Demineralized Water) in a stirring vessel.

2. Start stirring.

3. Slowly add SUDASOL BT 50 under stirring so that it evenly mixes with the material.

4. Once the calculated quantity of BT-50 is added you will see that the white emulsion is formed

5. Keep stirring for some time to achieve homogenous mixing

6. Product is ready

NOTE: Stirring should not be such that on adding SUDASOL BT-50 it sticks to the wall of vessel due to centrifugal force.

DMW should be of 0-5 TDS
DOSE: 0.8-1% of the formulation. E.g. for making 100 kg 37% Butachlor EW one has to add

1. 37 Kg Butachlor Technical

2. 62 kg DMW

3. 800gmto1KgSUDASOLBT50

Please note if the viscosity achieved after adding 1% Sudasol BT 50 is not enough for the observer then the dose can be taken upto 1.25% 

Additional Information:

Approx. Rs 850 / KgGet Latest Price

Brand Name:SUDASOL BT 50

SUDASOL BT 50 is a state of art product designed to formulate Pretilachlor/Butachlor EW (Emulsion in Water) formulations. The product has been designed for the formulators of Pretilachlor/Butachlor EW keeping in mind the cost efficacy and ease of use. The product inculcates following features:-

1. Single component system

2. No additional thickening agent (Gum) is required to improve the viscosity

3. Emulsion made is smooth and homogenous

4. Cost-effective because of extremely low dose (0.8-1%)

5. Easy to use.

PROCEDURE

1. Add Butachlor/pretilachlor technical and required quantity of DMW (Demineralized Water) in a stirring vessel.

2. Start stirring.

3. Slowly add SUDASOL BT 50 under stirring so that it evenly mixes with the material.

4. Once the calculated quantity of BT-50 is added you will see that the white emulsion is formed

5. Keep stirring for some time to achieve homogenous mixing

6. Product is ready

NOTE: Stirring should not be such that on adding SUDASOL BT-50 it sticks to the wall of vessel due to centrifugal force.

DMW should be of 0-5 TDS
DOSE: 0.8-1% of the formulation. E.g. for making 100 kg 37% Butachlor EW one has to add

1. 37 Kg Butachlor Technical

2. 62 kg DMW

3. 800gmto1KgSUDASOLBT50

Please note if the viscosity achieved after adding 1% Sudasol BT 50 is not enough for the observer then the dose can be taken upto 1.25% 

Additional Information: